
How to Build A Magnetic Motor
Author: Alfred Mccabe
More and more people are wondering how to build a magnetic motor as they seek energy independence and a cheaper alternative to state controlled standard domestic energy sources.
What Is A Magnetic Motor?A magnetic motor is a device that unlocks the intrinsic potential of magnets to provide what is known as "free energy".
The magnets need a small push or other input of energy to get started but after this they can run forever except when they need to be turned off for maintenance.
They can run forever because more energy is created than would otherwise be lost through friction and other losses.
A machine that can run forever despite friction is also a free energy machine and therefore an unlimited energy source. This energy can be used to power the appliances in your house if you wish, as well as all your other energy needs.
Why Can't I Buy One?
There is currently no major commercial application of this technology available in the market although several companies have fully working prototypes and are in the final stages of bringing their product to market.
Also, most of these proposed commercial applications are on an industrial scale and not designed for domestic use.
Finally, despite these promising commercial projects, most research and development in this exciting field has been suppressed by governments and other competing interests such as large corporations. A domestic device that you can buy in a store is a long way off but there is an alternative option.
DIY Magnetic Motor
Ultimately, not only is the magnetic motor a very easy and simple to understand concept but it is also quite easy to construct one yourself.
The basic magnetic motor consists of no more than some specialised magnets and some custom made parts. None of the materials are particularly exotic and all can be obtained from regular hardware and electronics stores.
Some specialised tools may be needed to fabricate some of the parts. It is helpful if you have access to a workshop.
The best way to make such a motor yourself is to use a set of well-tested and accurate plans. Some hobbyists prefer to learn as they go along without the use of plans but this is likely to lead to delays and a lot of testing before the motor is finally ready. You can avoid all this by using a good set of detailed diagrams that clearly show you, step by step, what you need to do.
DIY Magnetic Generator
Sailing against the wind of opposition, as you might imagine it is incredibly difficult to raise funds for research and development into magnetic generator technologies. However, there is a global community of enthusiasts who are making their own magnetic motors/generators at home.
With a few basic materials and some simple tools, anyone can make their own magnetic generator at home and use it to power several electric appliances. Even when the first commercial application of the magnetic motor comes to market, I expect that making your own at home will still be the most cost effective way to access this incredible energy source for many years to come.
Where To Get The Materials
The basic magnetic motor generator is nothing more than a few common electrical components, a set of magnets of a specific type, copper wiring and lead acid batteries. These can all be purchased locally or over the internet without any fuss.
Construction And Assembly
With the right materials and tools the actual construction and assembly of your motor is a cinch. You don't need a degree in electronics to figure out how to do this.
As with anything, the best approach to take is to follow someone else's lead. For a very small fee there are a number of experts on the internet who will sell you their tried and tested diagrammatical plans that show you exactly how to recreate an exact replica of a fully working magnetic motor.
Off The Grid
The great thing about generating your own electricity is that you no longer have to rely on being connected to the grid.
Who knows what the years ahead will bring us? Most of us are used to enjoying an uninterrupted electrical supply 24 hours a day, 7 days a week. But will this continue forever? What would you or most people do if your supply was suddenly snatched away from you?
By generating your own electricity you can eliminate all your worries in this regard and you can finally enjoy an immense sense of freedom from no longer having to rely on others to safeguard the needs of you and your family.
Make Money From The Grid
Another idea is to simply sell your excess electricity back to the grid. It is doubtful that you will use up all the electrical energy that you generate from the motor. So why not sell some back to the grid and make some cash out of it?
In fact, many countries will pay you not just for the electricity you sell to the grid but also for anything that you use yourself. The way they see it is that even if you only make your own electricity and don't sell any excess then you are still placing less demand on existing power stations and also reducing your carbon footprint.
Article Source: http://www.articlesbase.com/gadgets-and-gizmos-articles/how-to-build-a-magnetic-motor-2358417.html
About the Author
Alfred is a contributing author at Free Energy Magnet and uses this article spinning software.



Help building a Bedini pulse motor / magnetic coil.?
Ok, I have looked at a few YouTube videos and done some online search on building a Bedini pulse motor. I got all my parts together and I’m unable to get it to work. Bellow is my diagram:
http://upload-fast.com/files/f96f198c8f08a978db704bf26dc16bbd.gif
a) I’m Using a 22 and 26g magnet wire for my coil. (Using the one from Radio shack 3 for $5)
B)I’m using NTE parts which I purchase at FRY’s electronics.
Can anyone tell me what is wrong with this? I will update a real image of my setup tonight or tomorrow morning.
Ok,
I’m using a 100ohm and it is connected to middle of the switch.
Here is a links to the diagram I’m using:
http://upload-fast.com/files/c9d987c5cc05ab565d777846accb313e.jpg
and here is a link to my setup:
http://upload-fast.com/files/6ac57c38439f199eb5451a942cf5b488.jpg
http://upload-fast.com/files/8afad8f897efa78f73d516e9d637bc84.jpg
Can anyone tell me what is wrong here.
Here is what I also used as referenced:
http://www.youtube.com/watch?v=mOGjLDU2lX8
I’m using 2 x 9v batterys
No, it doesn’t. Anyone who is selling a “revolutionary idea” on youtube is a scammer.
how to build magnetic motor?
I am building a magnetic compressed engine?
I am building a magnetic compressed engine that will run a poll reverse gate in the cylinders that can allow the adjustment of reverse poll magnetic compression with a electric acelerator module to change the revolutions of the motor .Can any one help myself with suggestions of light materials such as alloys that need too adapt too wear in the engine as heat stress is no factor in this motor.
The brackets will have little effect on the generator. They are just being attracted by the stray magnetic field from the permanent field magnets. But few humans are capable of producing 350 watts. 150-200 is likely the best you can do.
You may be better off with a single 12v battery and a 12v regulator. Permanent magnet motors can work as generators, but they’re not designed for it, so they’re not as efficient.
Will a metal bracket interfere with a motor?
Hi, I wasn’t sure to place this question in engineering or physics, but it seemed more an electricity & magnetism question.
I am attempting to build a bicycle pedal-powered generator. A bicycle stand’s roller will move the DC motor’s (aka generator’s) shaft. I understand I will need a blocking diode (with a large heat sink) and also a voltage regulator and a pair of 12v batteries (it’s a 24v motor)…and lots of fuses in between (I am not taking any chances, but I am enjoying the attempt to build this).
However, I need to support the heavy motor / generator with a bracket. I purchased two 4-inch exhaust U-clamps to hold the motor to the platform, but the brackets have a strong magnetic attraction to the motor. Will this attraction (and the added metal of the bracket) interfere with the motor’s electrical generation capabilities?
The motor is a 24volt, 22amp capable of generating a maximum 350 watts, electric scooter motor XyD-6D permanent-magnet motor, 2600rpm. Thanks!
You are making a motor, not an engine (engines run on fuel, not electricity) The biggest wast of energy you have is pistons. If you are talking about a variable (electric) valve engine, that has already been done.
I have not been able to find anything coherent online about “Bedini pulse motor”, and i suspect a hoax.
I don’t expect your circuit to do much of anything, from the schematic.
From what i can see, when you turn the switch on, you will possibly start an oscillation, if the transformer is phased correctly, but with two air wound coils and a transistor that does not have too good a HF performance, it may not oscillate at all. If it does, the collector current may build up to a high enough value to blow out the transistor, as you have nothing limiting the collector current except the wire and the internal resistance of the batteries.
.
Who is selling “Magnetic Motors” in the USA, or where can I buy magnetic motor any where in the world?
About 72 hours ago I have learned about magnetic motors. I am somewhat familiar with physics and understand the conservation of energy. This magnetic motor changes the laws of physics. I do believe that this is real. I am looking to learn more, build or buy a unit. Can anyone in the world lead me in the right direction (s).
Thanks.
ie. http://www.youtube.com/watch?v=_iAT0RQaLtk
http://www.youtube.com/watch?v=T8WZD11alb0&feature=related
I f you know know anything about physics “NO I would do your home work” you should not get any points. Stick to grade school home work question questions. I have read and seen you before.
I guess you think 911 was a terrorist attack.
all motors are magnetic.
But I suspect you mean the perpetual motion machine. Doesn’t work, can’t work, violates the fundamental laws of physics.
Or, to put it another way, if it were possible, whoever built one would be a billionaire, and we would be using them in all our autos and to generate all our power.
.