Electric Magnetic Motor

Pulsed Electromagnetic Motor ...

No Need To Pay the Electric Company - Just Build a Magnetic Power Generator, Easy & Cheap

Author: Kevin Ng

As you know that with oil gushing out into the Gulf of Mexico, the planet heating up, and electricity getting more and more expensive, an extraordinary, free and simple solution presents itself: The Magnetic Power Generator. In a nut shell, this cheap, easy-to-build system produces enough energy to support an entire house.

But first, let's look at the alternatives:

Solar Energy:

Solar panels are great, but they can be very costly, and only work effectively in extremely sunny climates. They also take up a lot of space, and they're fragile to weather conditions.

Wind Energy:

Besides the obvious drawbacks, such as a huge wind mill taking up half your back yard, and trying to get permits to put it up, you'll also have to pay a considerable amount for it. And of course, you need to live in a place that gets constant wind.

In other words, while these alternatives are used by some people, they do not work for the majority of us, because they're not worth the hassle. This is what is so great about using your own magnetic power generator, because it is 100% independent (operates and works in any weather and temperature conditions), it is completely clean to run and the best part - it's free.

Further benefits of using a magnetic power generator:

  • It's cheap and easy to build, even for a complete beginner
  • It's safe to use for you and your family
  • It works in every home and does not take up a lot of space.
  • The material needed to build your magnetic generator is cheap and easily accessible anywhere you live in the world
  • It generates an abundance of energy, which can eliminate your power bills completely
  • It runs 100% clean; no harmful byproducts are produced
  • When the rest of your town has a power outage, you'll be unaffected

These types of magnetic generators are so powerful that the big corporations have tried to suppress any information about them for a long time now. This is because the potential of this technology represents a huge treat to them. However, with the world being in the state it is, it is now speculated that magnetic energy will start dominating the world market within the next 10-15 years, as energy/power companies will start implementing the technology into people's houses/businesses, etc.

But why wait until your energy company catches up, when you can literally be your own power company this week? It's easy and cheap; it will save you and your family thousands of dollars a year and you'll be sleeping soundly, knowing that you're making a tremendous ecological contribution to the planet.

Article Source: http://www.articlesbase.com/environment-articles/no-need-to-pay-the-electric-company-just-build-a-magnetic-power-generator-easy-cheap-2786143.html

About the Author

To save energy at home is to indirectly save money and heavily reduce home expenditures. Read more about Magnets 4 Energy Review for more information about saving energy at home. Learn more about saving energy and acquiring energy efficient homes, by visiting my website: http://www.smartplacestore.com/?page_id=851.html

This entry was posted in renewable energy and tagged , , , , , , , , , , , , . Bookmark the permalink.

9 Responses to Electric Magnetic Motor

  1. Spanky says:

    Incorrect. The inductance of the motor windings causes the current and voltage waveforms to be out of phase, so when the voltage is at zero the current is still flowing. The magnetic field does however collapse when the current waveform crosses zero.

  2. Ashwey says:

    what causes and electric motor’s magnetic field to collapse?
    need this asap! please :)

  3. linlyons says:

    what kind of motor?
    induction motor?
    brush type motor?
    makes a difference.

    in a brush motor, the brushes make the field change.
    in an induction motor, the AC current “flips”.

  4. Jesus H says:

    It depends. If it is a DC motor, then yes. If it is an AC motor, then the polarity does not matter.

    Regards.

  5. The Boot says:

    Yes you’re in good shape, I can confirm your answer!

    B = uH where u = 4.pi.10^-7 and H is the number of amp turns per m in the airgaps

    H = 830 x 5 / 0.012 AT/m

    multiplying this by u confirms your answer.

  6. Jay P says:

    If Earth had no magnetic field, would electric motors work?
    would they?

  7. sword_worrior says:

    When an electric motor spins, why does the magnetic field flip? I don’t understand =(?

    **more specifically: HOW does the magnetic field FLIP?

  8. Fred says:

    does the direction of the magnetic polarity matter for an electric motor?

  9. Clark says:

    Calculating the magnetic flux density in an electric motor?
    The field coil of an electric motor has 830 turns wound on a steel former.

    The air gaps between the magnetic poles and the armature are 6 mm each, and the field current is 5A.
    Assuming that the air gaps dominate the reluctance of the field coil magnetic circuit, calculate the magnetic flux density in the air gaps.

    So, do you sum up the reluctances of the air gap and that of the steel former? That is 2X of that of the air gap + the steel former’s?

    Could you please provide a worked solution?

    Thank you.
    Wait…assuming air gaps dominate means you ignore the reluctance of the steel former?

    I got 0.435 Tesla, can anyone confirm?

Leave a Reply

Your email address will not be published. Required fields are marked *

*


*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>