[TEMPLATE]Renewable Energy[/TEMPLATE]
[TEMPLATE]Equipment & Tools[/TEMPLATE]
[TEMPLATE]home improvement store[/TEMPLATE]
Motionless Electromagnetic Generator
Author: Max Power
The generator largely resembles any standard transformer, except for two actuator coils and permanent magnets included in the basic design. Within the generator set-up, there is a set of input and output coils extending from the magnetic core portions. A permanent magnet is placed at the centre of the magnetic core and it furnishes lines of magnetic flux moving into the core material, which results in left and right magnetic paths. While a driving current via input coils decreases the magnetic flux level from permanent magnets generated around input set of coils.
A magnetic filed in motion would induce a charge in coils and when the magnet is placed between two plates of metal; the resulting magnet flux would be evenly placed. Here the permanent magnet would act as flux battery and makes the operation of set-up possible to work. When a current in induced through an input coil the magnetic flux would move towards one metal plate and results a change in magnetic flux. The motionless electromagnetic generator core is built up of magnetic alloys as they have the capability to switch magnetic fluxes rapidly.
Typically, the generator works efficiently by changing its pattern of magnetic flux and doesn’t need to switch from one side to another. This theory was proposed by Tom Bearden on 26th March, 2002 as an option for electrical energy and claimed to generate enormous energy from vacuum. But the construction of this generator would be difficult as it involves a high set-up cost.
Article Source: http://www.articlesbase.com/diy-articles/motionless-electromagnetic-generator-1475109.html
About the Author
You can build your own motionless electromagnetic generator by getting these step by step blueprints from MagniWork. Lots of people around the world are generating their own electricity with this motionless electromagnetic generator You can too!
[TEMPLATE]amazon search[/TEMPLATE]
Has anyone heard anything about the motionless electromagnetic generator?
I have been researching a free energy device that uses coils to generate electricity. This device is called a motionless electromagnetic generator. Tom Bearden and some other guys invented it and obtained a patent for it (therefore it MUST work, right!?), but that is all I’ve heard for quite some time now. Does anyone out there know anything about this?
Has the motionless electromagnetic generator been put into production ?
How can I build an extremely low frequency electromagnetic field generator?
So I need to build an elf emf generator for a science project I’m trying to do. Any ideas on how I can build that? I need to build a continuous field, not pulse. It needs to reach 1Hz and less.
I need to build an elf emf generator for a science experiment. I do not need a large array. Emf generators can be made easily, I have made two so far. I am wondering if there is some sort of modulator to adjust the frequency itself. I need to reach 1Hz and less.
How hard would it be to produce 766 J with an electromagnetic generator?
I’m working on a project and would like to know if 766J is a lot to be produced in electromagnetic terms
Is it just me or is integrating an electromagnetic generator into a helicopter’s rotor system a great idea?
Think about it: have a controlled magnetic field in the region of the spinning helicopter blades, and have the blades or some part of the spinning apparatus be a magnetic material. The constant rotation in the field will supply a potential difference – free electricity for the helicopter.
Now I’m not sure of the logistics or anything, but isn’t the concept definitely something to think about?
The only motionless electromagnetic generator I know of is a solar panel. While you can generate energy with coils you need a strong changing magnetic field. The only way I know how to make one without a preexisting current is spinning some kind of a magnet by wind, water or steam.
No something does not have to work to get a patent. It is not the patent offices job to make sure something works.
A patent is only good if you can successfully sue someone for infringing on it.
I can patent an teleportation device right now if I want too but unless builds one almost exactly like the one I describe I am just wasting my time and money.
Ummm no….
That’s just more resistance the blades will have to overcome.
It already has “free” electricity from the alternator like device.
Here’s an idea of how they work. Much less drain on the Engine.
http://auto.howstuffworks.com/alternator1.htm
Get your advanced amateur radio license or whatever it’s called in your country, learn how transmitters work… and then know why you won’t be able to make one without a lot of time, money, and effort. Then, see if you can buy some stuff from a broken down submarine… then stop your silly search… and 1Hz anyways, it would essentially be a pulse.
To use a magnetic field to generate electricity, you need either a moving magnetic field or moving conductor or a changing magnetic field. Otherwise you’d have a perpetual motion machine. For instance, the magnetic fields produced by the Earth and the Sun fluctuate, so in principle a stationary conducting coil immersed in these fields could supply current to an external load. But the current would be far too weak to be of any use. I can’t think of anywhere accessible in the universe where a natural magnetic field changes rapidly enough to produce a useful amount of power without mechanical motion. The closest you can get to a motionless electromagnetic generator is magnetohydrodynamics. Here, the moving conductor is a plasma, so you’ve got no moving parts. A rapidly-moving conducting liquid in a stationary magnetic field , like a tidal current in the sea, between the poles of a strong magnet would also produce a voltage between two electrodes immersed in it. I haven’t done the sums, but I’d guess that the amount of power you’d get would be negligible.