Generating Electricity At Home

Comunidad de Earthships. New ...

Batteries for Generating Electricity at Home - Using Magnetic Power Generators

Author: Elijiah Rampart

Your magnetic power generator has been built and you are ready to turn it and to slash and destroy your electrical utility bill.  You have selected your charge controller, now what you need to consider is the type of battery bank you will need.  Batteries are used to store up all the massive amounts of electricity your magnetic power generator is making.  They are vital to achieving your goal of electric energy independence of going off grid.  Here I will give you guidelines on the various types of batteries available for generating power at home.

Batteries Store the Energy Generated

I am pretty sure most understand the principle that batteries are used to store the energy generated by your magnetic power system.  There are differences in how some batteries do this for their charge and discharge cycle.  Car batteries are designed for a very fast discharge of a few seconds (to start your car) followed by a slow recharge period.  Golf cart batteries are designed for a long slow discharge every day followed by a short period of recharge of a few hours and are known as deep cycle batteries.  These type of batteries are perfect for generating electricity at home using a magnetic power generator.  Golf cart batteries are the cheapest and most effective deep cycle battery available and are recommended for getting your power system up and running. 

Types of Batteries

The most common type of deep cycle battery is the lead acid type.  They are readily available, cheap, but require some maintenance during their useful life.  Sealed deep-cycle acid lead batteries are maintenance and trouble free, but they are more expensive.  Sealed gel batteries are also maintenance free, but they must not be overcharged or they will be damaged.  Since you will be using a charge controller in your system this will not be a problem.  All of these batteries come in 6 or 12 volts and your system configuration will tell you how many you need.

Configuring the Batteries in Your System

Based on your system design, you will probably have a 12 volt or 24 volt system. Your components like the charge controller and power inverter will be the same size as this design voltage.   This means the batteries have to be grouped in “strings” to reach the desired voltage.  Connecting batteries in series increases their voltage (minus to plus), and connecting them in parallel increases the current (plus to a bus bar and minus to a bus bar).   Most of the deep cycle lead acid batteries that are recommended for your system will be 6 volt.  If your system is 12 volts then you will have strings of two batteries each in series.  The number of strings needed is based on the total demand of your design load.

Batteries are an important component when you are generating electricity at home.  They enable you to store the huge amounts of energy you are making from your magnetic power generator, and cut or eliminate your electricity bill.  The 6 volt lead acid battery is the type recommended when you are first putting your system together.  To learn more on how you can construct your own magnetic power generator, and become your own power company by generating electricity at home, check out this link:  http://generating-electricity-at-home.canemanim.com 

Article Source: http://www.articlesbase.com/home-improvement-articles/batteries-for-generating-electricity-at-home-using-magnetic-power-generators-1573701.html

About the Author

Elijiah Rampart is an internet researcher on making electricity at home. He is particularly interested in magnetic power generations for home use to save money on electric bills. Find out more on information on how you can start saving money by making electricity at home, go to http://generating-electricity-at-home.canemanim.com

This entry was posted in renewable energy and tagged , , , , , , . Bookmark the permalink.

9 Responses to Generating Electricity At Home

  1. trikeya says:

    Can we generate electricity at home?

  2. SB-X says:

    Why/how does using less electricity at home cause the power plant to generate less electricity?
    I was always under the assumption (wrongly I suppose) that power plants would generate predetermined set levels of electricity, based on the number of connections on the grid, and time of day, and that they would only generate less if there was a significant drop in wattage used. It just seems more efficient.
    But clearly I have no idea how they work really. I have a very basic knowledge of AC power.

  3. CT says:

    How can you generate electricity at home by burning wood?
    Obviously this is possible, but I’m looking for a device that can be purchased “off the shelf” that will enable me to generate enough electricity to power a standard home by burning wood.

    I understand the issues relating to low efficiency….. I have thousands of acres of timber and tons of manpower….. I’m just wondering if there is an off the shelf solution currently available. Ideally, the unit would also provide hot water and residential heating.

    Thanks!

  4. Elijiah says:

    how to generate electricity at home?
    I’m looking for ways to lower my monthly electrical bill. I was looking at solar and wind power, anyone know about these technologies for home use, or any other options? Thanks.

  5. Bilal Mughal says:

    Possible to generate 450 kw electricity at home per month?
    Can i generate 450 kw electricity at home?

  6. Anonymous says:

    I have not heard of any such device, but there may well be one.

    The simplest, IMO, would be a steam turbine/generator configuration.

    BOL.

  7. Anonymous says:

    450 kw generator is big and noisy , It’s difficult to use at home even if your neighbors are deaf.

  8. Anonymous says:

    Yes, but it’s not as easy as you think.

  9. Anonymous says:

    Some power plants are “base load” they operate at 100% capacity. Others are peak or load following, as trollazoid described, and a few are used as synchronous condensors to modulate frequency and voltage.

    All are sychronized to the grid. Meaning they must operate at a preset frequency (60 Hz) and voltage (120 V). Only the amperage produced changes, and this affects the total wattage produced.

    The grid must only produce as much power as is demanded (accounting for some losses due to transmission losses and shorts). The easiest way to visualize the grid is as a balloon full of tiny holes, each hole being a load such as an appliance and the plants are air entering the balloon. The idea is to keep the balloon constantly at exactly the same size.

    As each load is reduced, or hole plugged, the supply of air must be matched to keep the ballon size constant. Therefore as each appliance or light is turned off it means the power plants need to produce less power.

Leave a Reply

Your email address will not be published. Required fields are marked *

*


*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>