Many Reasons Why You Should Make Use A Magnetic Motor As A Home Power Generator
Author: BrunauVigno
How many times have you looked at the amount you have to spend on your electricity when the bill comes in and wondered how you can save yourself money? If only you could generate the energy yourself you would have a lot more of your hard earned cash to spend on other things that you want in life. For this as the main reason I want to tell you why you should use a magnetic motor as a home power generator.
When the sources are not available you frequently have to rely on what you have in storage. This means you either have to pay a supplier or if you make your own have a way to store it. This is not the case when you use magnetic power as it just keeps on going forever.
A distinct benefit is that it does not cause any harm to the earth's system of natural resources. There has already been substantial damage caused by the gases emitted into the air when fossil fuels are burned. Causing further damage is not only detrimental to the health of the people and plants that are here now but also to those in the future and with fossil fuels supply running low we all need to look for ways that we can power our homes without added cost.
This magnetic motor is very compact and can fit in any house easily. You will enjoy this free energy for years to come.
I am sure you can now see why so many people are switching to producing their own power in this way. This is part of the eco trend for a better environment.
Article Source: http://www.articlesbase.com/hobbies-articles/many-reasons-why-you-should-make-use-a-magnetic-motor-as-a-home-power-generator-3865034.html
About the Author
My objective is to publicize the information about alternative sources of electricity. Click on the link to learn all the possibilities to make free power. Find magnet motor diagrams at ==>
how to make a magnetic motor?
I have some magnetics and I was wondering if I would be able to make a mini motor and how
any magnet will work. put the poles so that opposite poles face inward on opposite sides of the generator/motor. It will not make much power, but it will make something!
These are two different small motors
One uses a permanent magnet.
The other does not.
Permanent magnet desk top demo.
This called a Beakman’s Electric Motor.
http://sci-toys.com/scitoys/scitoys/electro/electro.html#single
Another different style Beakman’s Electric Motor.
http://home.hiwaay.net/~palmer/motor.html
This one does not use permanent magnets.
It is the one I built when I was a Cub Scout
It will run on a 6 volt lantern battery.
http://bizarrelabs.com/motor2.htm
This link will take you to a website where you can by kits.
http://www.simplemotor.com/#thumb
Wingman
what kind of magnets would you use in a magnetic motor.?
I want to make a magnitic motor for a wind turbine, i need tips on the magnets i should use.
Is it possible to make a magnetic wheel that can turn a 4 hsp motor?
“magnetic motors” which I think this is about, are not possible, they are a big scam.
.
Magnetic feild and rotation of motor?
We know that equal polls repel, and same poles attract. That is the theory of motors, dynamos etc. In electrically powered motor armature changes its polls rapidly. Ok. Why we can make a motor that’s armature is made with a magnet; same polls are connected together. If a motor like this rotate forever?
Can u imagine that if this theory put in a Adobe Flash Action scrip and will it works?
Firstly you will need to find a way to hold the same poles together otherwise one of the magnets will turn so that opposite poles will face each other.
Secondly, if you are able to hold them in place the magnets will get demagnetized if kept in such a position for a long time. Suppose you hold both the north poles together they will try to induce a south pole in each other and thus demagnetize the magnets.
The way I see it your motor will work,but not forever.It will stop when the magnets demagnetize
Also the magnets will keep the motor in motion(in the absence of friction) and you will need something to set them in motion. and since friction is present you will need to apply this force again and again or else the weight of the magnets will bring them to a rest
If i were making a magnetic motor…
that could run a gokart with about two people in it how much pull force do you think i would need to run the motor? I’m guessing about 100 lbs. of pull force or more. Anybody know that’s experienced. Also about how much pull force would i need to run a generator?
Resistance Force = Normal Force * Coeefiecient of Friction
Power = Resistance Force * Velocity
I guess the Coeeficient of friction is about 0.1 – you know better on this one. Then the force is the weight of the Gokart * 0.1; depends how heavy the 2 people are and the gokart is. The resistance force would be about 15 lb if 2 children where riding and up to 100 lb if 2 beer-drinking men are riding.
The power required by the motor would be the resistance force times the velocity;
Cheers