3 Facts Of Energy Sources - What If Your Electric Company Does NOT Want You To Know
Author: Sam Jones
Make up this situation: Your town has a power cut at 20:00. Its pitch-dark all over the place...but one house, which is lit up completely. The fact is that people in this house do not still know that there was a power failure. It could be you. It will barely cost you anything to draw it off. If this sounds exciting, then this article is for you.
Let's have a look at the methods of electricity production is approachable to us in 2010:
Solar Energy:
Solar panels works fine for large companies, but the houses cost far overbalances the benefits, and they just work efficiently in constantly sunny weather, for example California, Florida, etc. Additionally, in order to be effective, they take up a large part of your roof, and they're prone to damage in rough weather, and it's very costly to repair / replace.
Wind Energy:
Besides your noticeable drawbacks, such as like a large wind mill taking up a big part of your backyard, get permission to bring it up, and a large initial cost of buying one, a windmill will not give you as much electricity unless you live right on the edge of a breezy sea.
Magnetic Energy:
A magnetic energy generator works the same way in all temperatures and weather. It costs almost nothing to build and generate more energy in less time than any other viable method. In addition:
a¢ The materials to make a magnetic generator is extremely cheap, and can be easily found and bought from everywhere, where you can live in the world
a¢ It is easy to do, even for a person who is not a techie
a¢ It works in any house, anywhere and not take up much space
a¢ A magnetic power generator creates surprisingly large amounts of electricity, which can eliminate your electric bills completely stop your dependence on your power company
This technique is so strong that experts project that magnetic power generation can begin to establish a threat to traditional power companies within the next 15-20 years.
Whether you are seeing to replace your entire power company by turning yourself comfortable with magnetic electric power generator, or else if you simply in search for a strong backup plan in case of power failure, then this technology is your back.
It will not only save you and your family from thousands of dollars on power, but also you will sleep soundly, knowing that you have done a wonderful environmental contribution to the planet.
By the way, do you want to learn more about How To Make Electricity by building and using a magnetic force generator, Click Here! to go to the next page.
Article Source: http://www.articlesbase.com/diy-articles/3-facts-of-energy-sources-what-if-your-electric-company-does-not-want-you-to-know-3795857.html
About the Author
Sam Jones is an advocate for Green Energy Solutions Since 1997.
portable electric power sources?
I am planning to do a walking tour of a historic area that does not have any electricity. I will need to use my laptop to present sound clips, etc. Instead of buying a bunch of extra batteries for the laptop, I wondered if there is any kind of portable electrical source that could be carried over the shoulder and would make no noise when in use. Any ideas?
Tidal energy. As I recall, there is also abundant wind at the peaks of the volcanic formed areas. Wind generators are getting better and better. Solar is still expensive but gives you independance.
Videographers use battery belts. Definitely the way to go. Best case, a short wire with a connector to plug into your charger socket on your laptop can run it. Worst case, use an automotive laptop power supply to run it.
Google “battery belt” and “battery shoulder pouch” to start.
If you think about it, maybe lugging around a laptop is not the optimal way. You might want to pre-record your sound clips and stuff and just play it back on an iPod with speakers or something else that is smaller and lighter.
Good luck!
what are other sources of electric power to prevent the revival of nuclear power plant in bataan philippines?
which are the mains differences between hydraulic, pneumatic and electric power source?
I would like to know the diffrences of performance charasteristics and features, advantages and disadvantage of these three types of power source.
The differences about power supply, speed of operation, physical size, power handling and capability, cleanlinees of use, positional accuracy, cost exc..
Does somebody make an Electric PTO drive?
I’m trying to find a stand alone electric power source (220v) that will run PTO machinery. I’m having a hard time finding anything like this on the web. Does anyone know of a company that makes one?
Thanks in advance.
well its asking for you to describe faradays laws. just wiki “faradays laws of induction” and understand them theres at least a page on there.
a large coil of wire is connected to an electric power source so current flows in the coil a small coil passed?
a large coil of wire is connected to an electric power source so current flows in the coil a samll coil passed through the large wire. predict whats hapens i neeed this for my science question its 40 points of my test 10 points to best answer it has to be half a page least and most whole page
You ask for too much detail in one question. No one has time to write a whole paper in one shot for you. Break it onto many smaller questions.
It seems to me that you want a 240 v electric motor with a PTO coupling.
The issues you need to discuss are:
1. What is the mechanical power demand of the driven device? (horsepower or mechanical KW)
2. What electrical motor horsepower do you need to make sure you have sufficient motor horsepower?
3. How are you going to protect the motor in the event of a jam in the PTO driven device? Usually shear pins are used for this, but make sure they are properly sized.
4. How are you going to safely prevent the rotating shaft from coming into contact w personnel, animals, clothing, and other objects as this could be a disaster?
Once you have addressed these technical issues, then you would start to understand the issues associated with the manufactur of such a device.
I suspect for the reasons given, few would offer such for sale but you may well be able to fabricate one yourself if you address the techical details.