Tesla Generator – How To Create A Magniwork Magnetic Generator
Author: James Watson
A magnetic generator like tesla generator is an alternative for electrical energy and is not like the other traditional alternates, like solar energy and wind energy. The Magniwork magnetic generator is said to be perpetual as the electrical energy would be created by the perpetual motion of natural magnets. In addition, the magnetic generators run for very long time without halting as they are powered by magnets which last really long, for about four hundred years or so.
Generally, a tesla generator would harness the power from natural magnets, where the attraction and repulsion forces would be harnessed into a set-up. The setup would normally consist of magnets and turbine, here one side of turbine would be pulled down by a set of magnets and the other would be pulled up by another set of magnets. As a result, the motor would run continuously without stopping and generated electrical energy which will be transferred in batteries.
Also, the Magniwork magnetic generators are regarded as safe and eco friendly too. These generators wouldn't produce any harmful by-products and don't need to be monitored regularly. Finally, they involve fewer set up costs and very less maintenance costs.
Article Source: http://www.articlesbase.com/diy-articles/tesla-generator-how-to-create-a-magniwork-magnetic-generator-1968167.html
About the Author
To build your own tesla generator you will need these step by step instructions. Follow the link below to get the blueprints today - tesla generator
Can anyone help me recreate a TESLA ozone Generator?
If anyone that knows something about electricity could tell me what kinds of materials i could use to make the ozone generator?
(and where i could get them)
Here is tesla’s patent :
http://rpmgt.org/588177.html
Van de Graaff generator and Tesla coil?
Where can i actually buy a Van de Graaff generator and tesla coil? I find all these websites with them but they look like really small, ripoff sites. Does anyone know where i can buy these in terms of a large site (Buy.com, amazon.com, etc….) or a real store i can go to (Smithsonian, liberty science center,). No kit. I would prefer it set up in the box. Im fine with putting in batteries and screwing in a few screws, but i don’t want to assemble the whole thing.
what is the easiest way to build a tesla coil or van de graaf generator?
How long would it take to fully charge a Tesla Roadster with a bicycle generator?
Tesla turbine generator help?
If i rigged up a small compressor to a Tesla generator would the electricity generated exceed the electricity consumed from running the compressor?
Im familiar with how the turbine works, although im not too familiar with electricity itself.
That looks like what is commonly referred to as a Tesla Coil. There is plenty of information available online to build your own.
Wikipedia has interesting information available.
http://en.wikipedia.org/wiki/Tesla_coil
This site looks good too.
http://www.bugman123.com/Tesla/Tesla.html
I’ve put together a Jacobs Ladder, essentially a high voltage arc which will repeatedly climb between two vertical wires. Fun to watch, and creates plenty of ozone, but also very dangerous if misused. A furnace ignition transformer and a pair of welding rods make it an easy project to assemble.
http://tesladownunder.com/JacobsLadder.htm
No, you cannot get more energy of any type out of such a system than you put in. In fact, due to the inefficiencies of the machines involved, you will get less electricity than you put in.
It depends on how fast you pedal. See if you can get Lance Armstrong to do it in about 6 hours.
For a Tesla coil you will need massive amounts of small (20g) wire, and a winding mechanism to get the coil neat and straight. Quite and undertaking. All it is a glorified transformer.
A van de graaf is a metal ball attached to a long tube for to run a belt of rubber. A brush assembly is attached to the lower housing and another to the top ball. The idea is to “brush” electrons off of the lower metal housing and send it up to the top metal ball via that rubber belt. You would be better off buying a complete generator. They are not expensive.